The development of an earth resources information system using aerial photographs and digital computers

Analytical photogrammetry demonstrated that automatic three dimensional mapping of forest terrain was technically feasible. The examples were black and white photography at scales of 1:10,000 and 1:24,000. The major improvement in terrain modelling was the addition of the capability of joining small quadrangles together to form one large model about equal to the effective area of the pair of photographs. Improvements of somewhat lesser importance include: (1) the use of up to 16 grey levels; (2) the elimination of several coordinate transformations; and (3) the annotation of three-tone hysocline maps with elevations

Face and tone of voice in the communication of deception

The contributions of face and tone of voice (filtered speech) to the communication of honest and deceptive messages were examined. In general, tone of voice was a better source of deception and leakage than the face. In addition, raters' judgments of the combined audiovisual channel were better predicted from their judgments of tone of voice when the message was deceptive and from their judgments of the face when the message was honest. The relative importance of face and tone of voice was also affected by the availability of verbal contentwhen content was available the face became less important. Thus, judges obtained more information from facial cues that were added to filtered speech (a comparison between filtered speech and face plus filtered speech) than from facial cues that were added to the full voice (a comparison between the voice and face plus voice). In addition, judgments of the audiovisual channel without content (face plus filtered speech) were better predicted from judgments of the face, whereas judgments of the audiovisual channel with content (face plus full voice) were better predicted from judgments of filtered speech. Finally, the relative importance of face and tone of voice was also determined by the affect that was communicated. Tone of voice was a better source of information about dominance and submission; the face revealed more information and was more highly correlated with the combined audiovisual channel for communications of liking and disliking

The interplay of university and industry through the FP5 network

To improve the quality of life in a modern society it is essential to reduce the distance between basic research and applications, whose crucial roles in shaping today's society prompt us to seek their understanding. Existing studies on this subject, however, have neglected the network character of the interaction between university and industry. Here we use state-of-the-art network theory methods to analyze this interplay in the so-called Framework Programme--an initiative which sets out the priorities for the European Union's research and technological development. In particular we study in the 5th Framework Programme (FP5) the role played by companies and scientific institutions and how they contribute to enhance the relationship between research and industry. Our approach provides quantitative evidence that while firms are size hierarchically organized, universities and research organizations keep the network from falling into pieces, paving the way for an effective knowledge transfer.Comment: 21 pages (including Appendix), 8 figures. Published online at http://stacks.iop.org/1367-2630/9/18

Permeability and clearance views of drug absorption: A commentary

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/45051/1/10928_2006_Article_BF02354289.pd

Viscoelasticity of cellulose polymers and mucociliary transport on frog palates

The viscoelastic propertied of model polymer, hydroxypropylmethylcellulose (HPMC), in ternary solvent mixtures and the variation of viscoelastic properties under dilution with water were investigated. HPMC was dispersed in mixtures of glycerol formal (GF) or ethyl alcohol, propylene glycol (PG), and water. Each polymeric sample was oscillated at different frequencies with fixed stress amplitude and the changes in elastic modulus, viscous modulus, and apparent viscosity were measured at 30[deg]C. The moisture absorption rate of HPMC in PG:GF solvent mixtures in a 94% relative humidified environment was also studied. A linear relationship between the elastic modulus or viscous modulus and polymer concentration was observed for the HPMC samples. The relative mucociliary transport rate tested on the non-depleted frog palate model revealed a curvilinear correlation with the loss tangent (a ratio of the viscous modulus to the elastic modulus) of the polymeric solution. Using GF as a solvent for HPMC resulted in a formation of a rigid gel with the highest elastic modulus and viscous modulus among solvents selected. A higher affinity for water was found for HPMC in the PG:GF 90:10 mixture compared with HPMC in the PG:GF 70:30 mixture. However, the elastic modulus and viscous modulus were much higher for HPMC in the PG:GF 70:30 mixture.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/30730/1/0000379.pd

Biowaiver Monographs for Immediate‐Release Solid Oral Dosage Forms: Codeine Phosphate

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106898/1/jps23977.pd

Biowaiver monographs for immediate release solid oral dosage forms: Doxycycline hyclate

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing doxycycline hyclate are reviewed. According to the Biopharmaceutics Classification System (BCS), doxycycline hyclate can be assigned to BCS Class I. No problems with BE of IR doxycycline formulations containing different excipients and produced by different manufacturing methods have been reported and hence the risk of bio in equivalence caused by these factors appears to be low. Doxycycline has a wide therapeutic index. Further, BCS-based dissolution methods have been shown to be capable of identifying formulations which may dissolve too slowly to generate therapeutic levels. It is concluded that a biowaiver is appropriate for IR solid oral dosage forms containing doxycycline hyclate as the single Active Pharmaceutical Ingredient (API) provided that (a) the test product contains only excipients present in doxycycline hyclate IR solid oral drug products approved in the International Conference on Harmonization (ICH) or associated countries; and (b) the comparator and the test products comply with the BCS criteria for “very rapidly dissolving” or, alternatively, when similarity of the dissolution profiles can be demonstrated and the two products are “rapidly dissolving.”. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 1639–1653, 2010Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/64911/1/21954_ftp.pd

Biowaiver monographs for immediate release solid oral dosage forms: Aciclovir

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing (biowaiver) for the approval of immediate release (IR) solid oral dosage forms containing aciclovir are reviewed. Aciclovir therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) studies were also taken into consideration in order to ascertain whether a biowaiver can be recommended. According to the Biopharmaceutics Classification System (BCS) and considering tablet strengths up to 400 mg, aciclovir would be BCS Class III. However, in some countries also 800 mg tablets are available which fall just within BCS Class IV. Aciclovir seems not to be critical with respect to a risk for bio in equivalence, as no examples of bio in equivalence have been identified. It has a wide therapeutic index and is not used for critical indications. Hence, if: (a) the test product contains only excipients present in aciclovir solid oral IR drug products approved in ICH or associated countries, for instance as presented in this article; and (b) the comparator and the test product both are very rapidly dissolving , a biowaiver for IR aciclovir solid oral drug products is considered justified for all tablet strengths. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:5061–5073, 2008Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/61316/1/21392_ftp.pd

Advanced Technologies for Oral Controlled Release: Cyclodextrins for oral controlled release

Cyclodextrins (CDs) are used in oral pharmaceutical formulations, by means of inclusion complexes formation, with the following advantages for the drugs: (1) solubility, dissolution rate, stability and bioavailability enhancement; (2) to modify the drug release site and/or time profile; and (3) to reduce or prevent gastrointestinal side effects and unpleasant smell or taste, to prevent drug-drug or drug-additive interactions, or even to convert oil and liquid drugs into microcrystalline or amorphous powders. A more recent trend focuses on the use of CDs as nanocarriers, a strategy that aims to design versatile delivery systems that can encapsulate drugs with better physicochemical properties for oral delivery. Thus, the aim of this work was to review the applications of the CDs and their hydrophilic derivatives on the solubility enhancement of poorly water soluble drugs in order to increase their dissolution rate and get immediate release, as well as their ability to control (to prolong or to delay) the release of drugs from solid dosage forms, either as complexes with the hydrophilic (e.g. as osmotic pumps) and/ or hydrophobic CDs. New controlled delivery systems based on nanotechonology carriers (nanoparticles and conjugates) have also been reviewed